Publicité
Liens rapides
Publicité
Sommaire des Matières pour Wampat M-CAT1501W-HD
- Page 1 Assembly Instructions...
- Page 2 iGracias por elegir nuestros productos, por favor lea las instrucciones cuidadosamente Thank you for choosing our products please read the instructions carefully before antes de la instalaci6n, y guardelas correctamente! installation,and please keep the instructions properly IIJl·t½ht·IGG:t-W Consejos y trucos 1.Do not attempt to move this furniture without first removing all equipment 1.Si no quila todos los equipos en el primer lugar, no inlente mover este mueble 2.
- Page 4 Wooden dowel Cam bolt Cam lock Screw Sticker Plate Ø8x30mm Ø6x35mm Ø15x11mm Ø4x15mm A x 24 B x 17 C x 17 D x 17 E x 4 F x 12 Shelf support pin Bolt Glue tube Screw Plastic wedge Flat-head screw Ø8x5x16mm Ø6x13mm...
- Page 5 · Screw parts (B) into panels (7,8). Ø6x35mm...
- Page 6 · Insert dowels(A) into panels(3,6). · Attach panel (8) to panel (6). Attach panel (7) to panel (3). · Insert and secure cam lock (C) to panels (3,6) to lock it. Ø8x30mm Ø15x11mm...
- Page 7 · Insert dowels(A) into panels(3,6). · Attach panel (9) to panels (3,6). · Insert and secure cam lock (C) to panel (9) to lock it. Ø8x30mm Ø15x11mm...
- Page 8 · Insert dowels(A) into panels(3,4,5,6). · Attach panels (3,4,5,6) to panel (2) using screws(J). Ø8x30mm Ø4x50mm...
- Page 9 · Attach parts (18) to parts (19,20) x 12 using Bolts(N). · Attach part(O) into part(20), then attach leg(21) to part(O). Ø6x13mm...
- Page 10 x 12 · Attach parts(18,19) to panel(2) using Bolts(N). Ø6x13mm...
- Page 11 · Attach parts(P) to panels(16,17) using bolts(H). · Attach parts(R) to panels(16,17) using bolts(Q). Ø6x13mm Ă4x19mm...
- Page 12 · Slide panels(16,17) into designated area.
- Page 13 · Attach parts(E) to back of panels(16,17) using screws(F) as shown. x 12 Ø4x15mm...
- Page 14 ·Carefully slide panels (10,11,12,13) into place along the back of the assembly.
- Page 15 x 11 · Screw parts (B) into panel (1). Ø6x35mm...
- Page 16 · Insert dowels(A) into panels(3,4,5,6,9). · Attach panel (1) to panels (3,4,5,6,9). · Insert and secure cam lock (C) to panels (3,4,5,6,9) to lock it. x 10 x 11 Ø8x30mm Ø15x11mm...
- Page 17 x 14 x 14 · Secure parts(K) using Screws(L). Ø3x17mm...
- Page 18 Finished edge · Attach panel(14) to panels(5,6) using parts(G). Ø8x5x16mm ６...
- Page 19 Finished edge · Attach panel(14) to panels(3,4) using parts(G). Ø8x5x16mm...
- Page 20 Finished edge · Attach panel(15) to panels(4,5) using parts(G). Ø8x5x16mm...
- Page 21 WARNING Serious or fatal injuries can occur from furniture tipping over. To prevent the furniture from tipping over we recommend that it is permanently fixed to the wall. Wall anchor and hardware are included with this product. Please make sure hardware is suitable for your walls before installing, as different wall materials may require different types of anchors.
- Page 22 · Stick stickers(D) on cam lock(C). x 17 · Adjust leg(21) to level the unit. Final Assembly...