JVC KV-C10 Manuel D'instructions page 10

3
Monitor
MODE
4
Monitor
UP
H/P
or VOL
DOWN
5
Adjust the volume level on the car receiver.
To turn off the power
Press the POWER button on the monitor or the
• Turning off the engine will also turn off the TV tuner system.
10
All manuals and user guides at all-guides.com
Select TV as the input source.
Remote
Press the MODE button on the monitor or the remote
CH
controller repeatedly to select TV.
MODE
H/P H/P
VOL VOL
CH
Remote Select the channel you want to watch.
Press the UP or DOWN button on the monitor or the 5 CH
or ∞ CH on the remote controller to change the channels.
CH
MODE
H/P
VOL
CH
If the channel selection is set to "AUTO" (See page 12.)
You can select only the channels preset by the auto
memory function. (See page 11.)
If the channel selection is set to "MANUAL" (See page
12.)
You can select all the channels. (Channel coverage: VHF
channels 1 to 12, UHF channels 21 to 69)
TV VIDEO 1
Selected channel number appears
on the screen for a while.
(power) button on the remote controller.
VIDEO 2
08