Office Star Products S2721 Instructions De Montage

CHAISE DE DOS DE L'ÉCRAN S2721 AVEC DES BRAS
INSTRUCTIONS DE MONTAGE
7R
8,11
12
4
8,9
8,10
3
1
Enlever toutes les pièces du carton, séparer par des numéros d'article indiqués sur la liste des pièces, et vérifier les
quantités de partie.
ÉTAPE 1 Insérer les cinq roulettes (1) dans la base (2). Mettre la base (2) debout de manière que les roulettes soient sur le
plancher. Insérer le vérin pneumatique (3) dans la base (2).
ÉTAPE 2 Attacher la plaque du siège (4) au coussin du siège (5), avec la flèche orientée vers l'avant du fauteuil en utilisant quatre
Rondelles plates (8) et quatre Vis moyennes (10). RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 3 Attacher Support du dossier (12) à l'arrière de la Plaque de siège (4), utilisant trois rondelles plates (8) et trois vis courtes
(11), COMME MONTRÉ DANS LE DESSIN DÉTAILLÉ A. RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 4 Aligner et fixer les trous dans les bras (7L et 7R) sur les trous dans le coussin du siège (5) à l'aide de trois rondelles
plates (8) et de trois longues vis (9) pour chaque bras. RESSERRER COMPLÈTEMENT LES VIS.
ÉTAPE 5 Placer le siège assemblé sur le dessus du vérin pneumatique (3) et pousser la pression vers le bas.
RESSERRER COMPLÈTEMENT TOUTES LES VIS.
ATTENTION : VÉRIFIER QUE TOUS LES VIS SONT INSTALLÉS ET BIEN SERRÉS AVANT DE L'UTILISER.
DÉTAILLÉ A: Assembler en ar-
6
rière la Support du dossier (12)
sous la Plaque de siège (4).
7L
5
8,10
PIÈCE
1. Roulettes . . . . . . . . . . . . . . . . . . . 5
2. Base . . . . . . . . . . . . . . . . . . . . . . 1
3. Pneumatic Cylinder . . . . . . . . . . . 1
4. Plaque de siège. . . . . . . . . . . . . . 1
5. Coussin du siège . . . . . . . . . . . . . 1
6. Dossier . . . . . . . . . . . . . . . . . . . . 1
7. Bras gauche (7L) et droit (7R) . . . 2
8. Rondelles plates . . . . . . . . . . . . 13
9. Vis longues . . . . . . . . . . . . . . . . . 6
2
10. Vis moyennes . . . . . . . . . . . . . . . 4
11. Vis courtes. . . . . . . . . . . . . . . . . . 3
12. Support du dossier . . . . . . . . . . . 1
13. Clé Allen . . . . . . . . . . . . . . . . . . . 1
S2721 SCREEN BACK CHAIR WITH ARMS
13
11
8
3
4
12
1
QTÉ
WARRANTY
Office Star chairs are warranted from the date of purchase against failure due to material and workmanship as follows:
• 5 Years on all non-moving metal parts.
• 2 Years on component parts including Control mechanisms, pneumatic cylinders, wood, plastic parts, base and casters.
• 1 Year on upholstery fabric and foam against wear and deterioration.
To make a warranty claim, contact Parts Department. Provide model number and description of the problem and obtain return
authorization. At it's option Office Star Products will:
(a) Supply compatible components of current manufacture.
(b) Repair the customer's component. The customer must prepay freight on any components returned to the factory. Return freight
on components still in warranty will be paid by Office Star Products.
*All warranties are limited to the original purchaser for normal Residential usage by persons weighing 200 lbs. or less. This warranty will not cover labor,
freight or damage from misuse, abuse, negligence, alteration, accident, vandalism, rusting, acts of nature or any other event beyond the control of Office Star
Products. The warranty does not cover cosmetic damage that may result from normal use. Liability for incidental or consequential damages is excluded to the
extent permitted by law. The user assumes all risk of injury resulting from use of this product.
Our quality standards are among the highest in the industry. Sometimes, no matter how hard we try, there are times when parts
are damaged or missing. Our Parts Department will do everything possible to promptly remedy the problem. Contact us via e-
mail parts@officestar.net, by Fax 1-909-930-5629, or toll free parts number 1-800-950-7262, Monday through Friday 8:00 a.m.
- 5:00 p.m. Pacific Time.
© Office Star Products Mai 2005
OPERATING INSTRUCTIONS
FEATURES
• HEIGHT ADJUSTMENT
To raise seat remove pressure from seat and lift lever (1).
To lower seat height sit on chair and lift lever (1).
• LOCKING TILT ADJUSTMENT
For individual comfort, this chair has been equipped
with an adjustment that will allow the user to change the
tension of the tilting feature. Turn knob (2) clockwise to
increase tension and counter-clockwise to decrease or
ease the tension. To lock return chair to the upright posi-
tion and push lever (1) in. To unlock pull lever (1) out.
• ARM HEIGHT ADJUSTMENT
To adjust arm height, push in button (3) and set desired
arm height. Release button (3) when desired arm height
is reached.
WARNING
1. Use this product only one person at a time.
2. Do not use this chair unless all bolts screws and knobs
2
are securely tightened.
3. Check that all bolts screws and knobs are tight every
three months or as needed.
4. Dispose of packing material properly. Do not use plastic
cover as head covering. It may cause suffocation.
5. Do not use chair as a stepladder.
6. Use this chair for its intended purpose only.
7. Use mild detergent only for cleaning.