Publicité
Les langues disponibles
Les langues disponibles
USE MODE is actual contrai mode for light, that provide dimming
and color temperature adjustment.
01. How to go USE MODE
02. How to adjust the light ROUGHTLY
03. How to adjust the color temperature FIN ELY
04. How to SAVE and LOAD the value
: Record current
value at mem1
button
* �:
4"
:
click
press and hold
1\
NOTE------
Every values are automatically
saved after display blinking.
so the last value remained
when the device turned off and on.
CONFIGUE MODE is for tuning color temperature range of
each LED and for controller setting.
01. Howto go CONFIGURE MODE
_
..
..
02. How to set LOWER Range
: Lower value
_
..
..
03. Howto set HIGHER Range
: Higher value
* �:
4"
:
click
press and hold
1\
NOTE--------..
+
D D
Hl
LO
>Rate •�• •>sens
1
1) Rate : Speed Rate
2) Sens : Sensitivity
3) Initial Range : 2000K - 9000K
4) Factory Reset :
@ press 'LO' button first
@then 'Hl' button at the same lime for 5 sec.
Publicité
