JAPANNEXT JN-IPS2700UHD Manuel D'utilisation page 10

Menu Sub-Menu
BRIGHTNESS
CONTRAST
PICTURE MODE
BRIGHTNESS
DCR
SHARPNESS
H. POSITION
V. POSITION
CLOCK
IMAGE
PHASE
ASPECT
COLOR TEMP.
COLOR
TEMP.
RED
GREEN
BLUE
LANGUAGE
OSD H. POS.
OSD
OSD V. POS.
SETTINGS
OSD TIMER
TRANSPARENCY
COLOR AUTO. ADJUST
IMAGE AUTO. ADJUST
RESET RESET
AUTO POWER DOWN
SIGNAL SOURCE
LOW BLUE LIGHT
MISC.
VOLUME
FREESYNC
OD
Make sure your graphic card supports FreeSync (AMD only but not all AMD graphic card does).
In case your graphic card isn't FreeSync compatible it's better setting FreeSync function OFF
in monitor OSD menus to avoid problems.
OSD MENU (monitor function control menu)
Value
0-100
0-100
Standard
Game
Movie
Text
FPS
RTS
ON
OFF
0-4
0-100
0-100
0-100
0-100
WIDE
4:3
COLD
WARM
USER
0-100
0-100
0-100
Japanese/English/Francais
etc...
0-100
0-100
0-60
0-100
ON
OFF
HDMI 1
HDMI 2
DP 1
DP 2
0/25/50/75/100
0-100
ON
OFF
ON
OFF
About FreeSync
Comment
Level can be adjusted from 0 to 100.
Level can be adjusted from 0 to 100.
Choose the picture mode:
For videos games there is three
mode:
GAME / FPS / RTS to choose
according to your use.
Dynamic contrast ratio (to add more
contrast).
Level can be adjusted from 0 to 4.
Not available
Not available
Not available
Not available
Choose aspect ratio.
Choose color temperature.
When selecting USER you can adjust
each level of RED, GREEN, BLUE.
Level can be adjusted from 0 to 100.
Level can be adjusted from 0 to 100.
Level can be adjusted from 0 to 100.
Choose the OSD menu language.
Level can be adjusted from 0 to 100.
Level can be adjusted from 0 to 100.
Time can be adjusted from 5 sec to
60sec.
Level can be adjusted from 0 to 100.
NA
NA
Reset all settings to original factory
settings.
Monitor power will turn off when no
signal.
Select signal source.
Level can be adjusted from 0 to 100.
Set up Freesync function ON/OFF (to
be set to OFF when using non-AMD
card).
Set the overdrive ON or OFF. Setting it
ON will make response time faster.
10