Hammerhead HLMT100 Mode D'emploi page 9

OPERATION
2. TO TURN THE COMPACT LASER
MEASURING TOOL ON AND OFF
a. Press the power/mode button
to turn on the tool. The tool
will default to the single distance
measuring mode.
b. Press the power/mode button
for about 1 second to turn off the
tool.
NOTE: When the measuring tool is
inactive for 3 minutes, it will automatically
turn off to save battery power.
3. CHANGE THE UNIT OF MEASURE
a. Press and hold the power/mode button to turn the compact laser measuring tool off.
b. Press and hold the power/mode button
inches. Continue holding for 3 seconds until the desired unit of measurements (inch/
feet or meters) is displayed on the screen. When the desired unit of measurement
appears on the screen, release the power/mode button
the button, the compact laser measuring tool turns itself on and subsequent
measurements will be displayed in the selected unit.
3
COMPACT LASER MEASURING TOOL
All manuals and user guides at all-guides.com
2
for 1 second: the tool defaults to feet and
. After releasing
m
9