Publicité
Les langues disponibles
Les langues disponibles
1 Replacing the switch
EN - 8
All manuals and user guides at all-guides.com
Switch Replacement for CAT3 PRO
8 We recommend marking the position of
the switch with sealing wax.
9 Place the cable in the connector housing.
Ensure that the cables between the switch
housing and CAT3 PRO housing are not
pinched.
10Mount the nut with ring wrench (SW 14)
on the flange plug (tightening torque
1 Nm).
11 Mount the connector housing and mount
the cylinder head screws (M3 × 16) with
the Allen key (SW 2.5) (tightening torque
0.4 Nm).
BEI.0369.0 • 2021-02-16
Publicité
