Publicité
Les langues disponibles
Les langues disponibles
5. Playing Music Functions
When the headset connects to a mobile phone or Bluetooth transmitter which supports A2DP, you can enjoy music wirelessly through the headset.
Volume up
Volume
Last song
Next song
Pause
Play
Line in input
Note:
When playing music on some smartphones / BT devices, the music will be transmitted via the mobile phone's speaker instead of the headset. You have to select "transmit the
sound via Bluetooth" in the settings menu and then choose "BTH300" as speaker device. The music will be transmitted to the headset. Please refer to your mobile phone's user's
manual for further information.
When the volume is adjusted to max or min., you will hear one prompt tone.
If you want to remotely control last/next song, pause/play, it needs your Bluetooth mobile phone or Bluetooth transmitter paired with the headset to support AVRCP profile,
please refer to the user's manual of your mobile phone or Bluetooth transmitter for further information.
The Bluetooth will disconnect between headset and mobile phone automatically if you plug 3.5mm audio input, the other functions of headset are unavailable in this time. You
can listen music via 3.5mm audio cable.
6. Making calls
Function
Cancel calling
Answer a call
Reject a call
End a call
Volume up
Volume down
Call transfer (cell phone to headset)
Microphone mute
Cancel mute
Voice dial
Redial last number
7. LED indicator
A.
Charging
LED Indicator
Status of headset
Red LED on
Charging
Red LED off
Finish Charging
3
All manuals and user guides at all-guides.com
Functions
Status of the headset
Playing music
Playing music
Playing music
Playing music
Playing music
Pausing
Turned off
Status of BTH100
Calling
Incoming ring
Incoming ring
During a call
During a call
During a call
During a call
During a call
During a call
Standby mode and connected to a device
Standby mode and connected to a device
B. Pairing with Bluetooth device
LED Indicator
Red and blue LED flashes alternately
Blue LED flashes once quickly every 2 seconds
Blue LED flashes twice quickly every 4 seconds
Blue LED flashes three times quickly every 4 seconds
Blue LED flashes quickly
Blue LED flashes once quickly every 4 seconds
Red LED flashes twice every 30 seconds
LED indicator
Press + button
Press - button
Press ◄ button once
Press ► button once
Press
button once
Press
button once
It can playing music through 3.5mm audio line
Operation
Press MFB button once
Press MFB button once
Press and hold MFB button for 2 seconds and release it until hearing
indication tone
Press MFB button once
Press + button
Press －button
Press MFB button for 2 seconds
Double click MFB button
Double click MFB button
Press
button about 2 seoconds
Double click MFB button
www.everik.com
Status of headset
Pairing mode
Not connect device
Have already connected HFP or A2DP
Connect HFP and A2DP simultaneously
Calling/incoming call
During a call
Low battery
BTH300.KM.072013.IM
Publicité
