SOLIS STEEL Mode D'emploi page 28

T HE BU TT O N S AN D T H EI R F UN CT I ONS
▲ ▲
CAN CEL button (A)
■ ▲
You can stop the toasting process and any other function immediately with the CAN-
CEL button.
Once the operating lever has been pushed down, the CANCEL button surround
● ▲
lights up in blue.
If you press the CANCEL button during the toasting process, the toasting function
GB ● ▲
resp. any other function stops and the bread is lifted up immediately. The button
surrounds go out.
REHE AT button (C)
■ ▲
You can warm up bread / pastry that has already been toasted with the REHEAT
function.
Place the bread / the toast in the slots.
● ▲
Select the desired toasting degree by turning the roasting degree control to the
● ▲
corresponding position.
Push the operating lever (E) down to start the warming-up process. The bread is
● ▲
moved down and simultaneously centered. The CANCEL button surround lights
up blue. Press the REHEAT button right after lowering the bread, the blue button
surround lights up as well. The warming-up function is activated.
The bread is automatically lifted when the warming-up process has been com-
● ▲
pleted. The button surrounds of the CANCEL and REHEAT buttons go out.
Note:
The warming-up process can be interrupted at any time by a mere press of the CAN-
CEL button. This stops the warming-up process and lifts the bread.
DE FR OS T button (D)
■ ▲
With the DEFROST function, you can defrost frozen bread / frozen toasts and subse-
quently toast them. The toasting time is therefore longer than when toasting bread
the classical way.
Place the frozen bread / the frozen toast in the slots.
● ▲
Select the desired toasting degree by turning the roasting degree control to the
● ▲
respective position.
To start the defrosting process, push the operating lever (E) down, the bread is
● ▲
moved down and simultaneously centered. The CANCEL button surround lights
up blue. Press the DEFROST button right after lowering the bread, the blue button
surround lights up as well, the defrosting function is activated.
54
Once the defrosting and toasting processes have been completed, the bread
● ▲
is automatically lifted and the button surrounds of the CANCEL and DEFROST
buttons go out.
Note:
The defrosting process can be interrupted at any time by a mere press of the CANCEL
button. This stops the defrosting process and lifts the bread.
B EF OR E FI R ST US E
▲ ▲
Remove and discard all packaging materials and potential advertisement stickers
● ▲
(except for the type plate).
Wipe the appliance chassis clean with a soft, slightly moist towel and dry it.
● ▲
Place the appliance on a dry, even and heat resistant work surface.
● ▲
Make sure that the bread crumb tray (G) is pushed all the way into the appliance
● ▲
Note:
Before the toaster is used for the first time, it is recommended that the roasting de-
gree control (B) is set to the highest position 6 and the toasting process is completed
once without toast / bread, by connecting the power plug and pushing down the op-
erating lever (E). The toaster produces thin smoke and potentially a slight smell when
used for the first time. This is absolutely normal and does not impair the functionality
of your toaster in any way. Make sure that the room is sufficiently ventilated.
GB
55