Publicité
Les langues disponibles
Les langues disponibles
Attention: Please read the following instructions carefully
to ensure that mounting operation will be carried out in the
right way .These instructions should be properly
preserved for future reference.
Before Installation;
Take the parts carefully out of the packaging.
Make sure, before using the lighting system that this has
not been damaged during transportation.
The lighting system must not be operated if there is
damage to cable or the electrical parts are damaged. Each
faulty fuse has to be replaced. Repairs must be done by a
specialist electrician.
Keep packaging materials well away from children and
pets. Danger of suffocation!
SAFETY INSTRUCTIONS
1.
The work light is IP54 and IK08 rated, to be
suitable for indoor &outdoor use.
2.
Ensure that the lamp is stable and it has a firm
footing.
Ensure that the cable is not touching any sharp objects
and the main plug connector is adequately protected
against rain or moisture.
3.
The lamp has been equipped with 3m H07RN-F
3G x 2.50mm² cable + VDE plug. Then it can work after
you connect with the power and be controlled by the
switch.
4.
The lamp must be earthed.
5.
1pc of 230V output socket (IP54) on the backside
of lamp.
The socket is convenient to be linkable with other electrical
appliance for working. WARNING: the output electricity
summation of socket must be less than 3000W.
6.
Before mounting and maintenance, please ensure
that
the electrical supply has been switched off to avoid any
electric shock. WARNING: the maintaining shall be
operated by the qualified electrician.
7.
If the external flexible cable or cord of this
luminaire is damaged, it must be exclusively replaced by
the manufacturer or a qualified electrician in order to avoid
a hazard.
8.
The lamp can be folding / opened out to 290
degree, for 2 lighting faces..
ETHOS By ENERGY DISTRIBUTIONN.V.
Rue de France, 7
B-4280 HANNUT - BELGIUM
GB
Safety and warning notes:
Do not look directly into the LED – especially for longer
periods of time – without protecting your eyes.
A LED beam should not be directed into other people's
eyes.
Operation is strictly forbidden if there is damage to the
lights, plugs or the supply line.
Never make your own repairs to faulty parts. Repairs must
be done by trained specialists.
Do not leave children unattended in the area of the lights
or other electrical appliances.
Never expose the lights to a direct jet of water (garden
hose, for example) and never immerse the lights into
water or other liquids!
Do not expose the lights to extreme heat or exposed
flames.
The entire product must neither be changed nor
converted. Changes made to the lighting set lead to invali-
dation of the guarantee (warranty).
Care and servicing:
You must make sure that the power supply is disconnec-
ted before cleaning.
Use a dry, or slightly damp cloth for cleaning.
Never use chemicals or abrasives for cleaning.
Disposal:
Old electronic equipment must be brought to public
connection points and must not be disposed of as
household waste.
This marking indicates that this product should
not be dis-posed with other household wastes
throughout the EU. To prevent possible harm to
the environment or human health from
uncontrolled waste disposal, recycle it
responsibly to promote the sustainable reuse of
material resources. To return your used device ,
please use the return and collection systems or
contact the retailer where the product was
purchased. They can take this product for
environmental safe recycling.
Stand for Work Light (Reference 491111201 – Not
inclued)
A tripod is available for the 2 x 20W work light and
can be connected as shown:
Publicité
