Bestherm TF-2116Y Manuel D'instructions page 16

FUNCTIONS & OPERATION
To operate the fan, use the remote control or the touch
buttons on the control panel of the fan.
Place the fan upright on a solid surface the is dry, level,
and stable. Do not place the unit near a window where it
can be exposed to rain or moisture.
Put the plug into the socket, The fan will enter standby
mode.
Press the On/Off button (1,13) to start or stop the fan.
Press the Speed button(2,10) to select the desired fan
speed Low(I) - Middle(II) - High (III), the relative speed
indicator will illuminate.
Press the Mode button (4,12) repeatedly, and the wind
will cycle in the order of "normal wind( ) - natural
wind( ) - sleep wind( )", the relative fan mode
indicator will illuminate.
Press the Swing button (5,9) to oscillate the fan, press it
again to stop the function.
Press the Timer button (3) to set the fan to automatically
turn off when the timer ends. The timer can be set from 1
to 15 hours. Each press increases the timer by 1 hours.
You can also set the timer by"+""-"button on the
remote control.
Press Indicator Off button(14) on remote control, the
indicators will be turned off. and press the button again,
the indicators will be lighted on.
Note ： If no operation after 180 seconds, fan will
automatically turn off the screen.
6