Hiltron security XR8 Mode D'emploi page 3

security
Made in Italy
BT2014/35/UE
EMC2014/30/UE
CHARACTERISTICS
Dual-element shielded sensor with FRESNEL lens with 5 beams
Signalling through LEDs of radio transmittion and condition
discharged battery
High immunity to RF 30Vm
Detection test and radio transmission
Antiopening protection tamper
Sensitivity adjustable by trimmer
Power supply voltage battery 9V (included)
Consumption in st/by 10µA
Alarm transmission delay 5min
Beams of the lens 5
Coverage angle (PIR) H: 10°; V: 40°
Coverage max. 4mt
Threshold level for low-battery 7,6 Volt
Operating frequency 433,92MHz
Sensitivity adjustable by trimmer
Initial stabilizing time 60"
Dimensions (W)38mm
Dimensions (H)117mm
Dimensions (D)25mm
The XR8 is a passive infrared sensor with 5 beam Fresnel lens, it is particularly adapt for doors and
windows passage control.
Allows to protect the access in a ambient without prevent the regular movement inside it.
INSTALLATION
The device is installed by fitting the XR8 sensor in a manner that allows it to transmit radio signals to
the base unit without interference. You should therefore avoid locations with obstacles such as concrete
pillars or large metal structures, or any interference from radio sources on the same transmission
frequency. The fewer obstacles between the sensor and the base unit, the greater the range.
The sensor should be firmly attached to walls, ensuring the area is absolutely free from vibrations. Avoid
direct exposure to sunlight and keep the sensor away from heat sources such as radiators.
Lead free
Pb
RoHS
compliant
RECOMMENDED INSTALLATION
Detector tend infrared radio XR Series
XR8
3