9) Display Brightness Adjustment
Press the SNOOZE button to adjust brightness of the LED display. There are
4 brightness levels.
10) USB Charging
The USB charging port supports charging mobiles and supplies 1A charging
current.
11) LED Battery Indicator on the Shaker
LED is off: No battery is inserted or power is too low.
LED is always on: Low battery. Please replace the batteries.
LED is flashing 1 time every 10 seconds: The shaker works properly.
LED is flashing 5 times every 5 seconds: The shaker is not connected with the
alarm clock.
Battery Operated Mode
When the device is powered by batteries only, the display will turn off after 10
seconds and the alarm will only sound for 3 minutes. USB charging function
does not work.
The battery life can last for one year normally.
We recommend the use of a long-life batteries to ensure maximum
performance.
Power Adapter
The power adapter equipped is 5V 2A.
Adaptor specification
•
Adaptor manufacturer name or trademark: W&T ELECTRONICS
CO.,LTD.
•
Adaptor Model Number: W&T-AD1912E050200EU
•
Input voltage and frequency: 100-240V~50/60Hz 0.35A
•
Output voltage, current, power: 5.0V 2.0A 10.0W
•
Average active efficiency: 78.7%
•
Efficiency at low load (10%): 80%
•
No-load power consumption: 0.07W
12) Restore Factory Settings
To restore factory settings, press the TIME and
the same time. After hearing a DiDi sound, all settings are cleared.
buttons for 5 seconds at
21