Publicité
Les langues disponibles
Les langues disponibles
LOADING THE BIKE(S)
5.
Determine the appropriate setting for the wheel hook assemblies by measuring the "center to center"
distance of the bike wheels. (Figure 4)
6.
Adjust the wheel hook assemblies to match the "center to center" bike wheel distance by sliding
assembly along the arm support. (Figure 5)
7.
Firmly tighten the handles to secure wheel hook in position.
8.
Load the smallest bike first on the vehicle side using the lower wheel hooks. (Figure 6)
9.
Start with front wheel, and hang from wheel hook as shown in Figure 6.
10.
Then mount the rear wheel on the opposite hook.
11.
Secure both wheels by firmly attaching the rubber strap. (Figure 6)
12.
Use two (2) Hook & Loop straps to hold the bike frame to the bike carrier arm supports as shown.
13.
Load the second bike so that the handle bars are in the opposite direction of the first bike. Repeat steps
9, 10, 11 and 12.
CENTER TO CENTER
DISTANCE – BIKE WHEEL
FIGURE 4
RUBBER STRAP
HOOK & LOOP STRAP
Cequent Consumers Products
27070 Miles Road
Solon, OH 44139
Technical Service: (800) 234-6992
Item:
Description:
FIGURE 6
1370100
Steel Sport Wing Bike Carrier
CENTER TO CENTER
DISTANCE - WHEEL HOOK
WHEEL HOOK
VEHICLE SIDE
Page 2 of 3
ARM SUPPORT
FIGURE 5
HANDLE
RUBBER STRAP
HOOK & LOOP STRAP
1370100N
Rev B 06-08
Publicité
