Outwell POLLUX LUX 650873 Mode D'emploi

POLLUX LUX
MODEL: 650873 ( CREAM WHITE )
MODEL: 651151 ( SHADOW GREEN )
1. BUTTON
7. LAMP BODY
2. LAMPSHADE
( EXTENDED )
6. EDGE OF LAMPSHADE
UK: INSTRUCTION MANUAL
Light modes:
• Press the button (1.) to switch on / off
• Press and hold the button to dim the
Use of the lamp:
• Lamp is powered by 100-240V AC.
• To extend lantern lampshade, grab
4. ADJUSTABLE
HANGING POINT
• Hang lamp from the hanging point,
• For indoor use only
• Lamp can be cleaned
5. AC/DC ADAPTER
• Do not use corrosive
• Do not stare into the light source
Light source: LED
This product contains a light
source of energy efficiency
class E.
Light source and control gear
is not replaceable. This would introduce
weak points in the construction, that
could reduce the lifetime of the product.
3. LAMPSHADE ( COLLAPSED )
the light
light. The light can be dimmed step-
less to any setting between maximum
and minimum light output.
the edge of the lampshade (6.) and
push the body out from the inside, do
not pull on the cord. To collapse the
lampshade, reverse the above
adjust height as needed by gently
moving the cord through the adjuster
with a damp rag
liquids to clean the lamp
Instruction for removal of light source
and control gear by market surveil-
lance authorities:
1) Remove lamp lens by using a flat-
head screwdriver to open the four tabs
2) Unscrew 2 pcs screws holding PCB
with LEDs in place
3) Cut needed wires to remove the
required components for testing
Instruction for disassembly of lamp
for disposal of components
when lamp has reached the
end of its usable life:
- See steps 1-2 above
3) Cut wires and remove screws to allow
removal of electronics on circuit board.
Dispose of electronics according to
local regulations
4) Dispose of remaining components
according to local regulations
Technical data:
Input (AC/DC adaptor):
100-240V , 0.3A
Output (AC/DC adaptor):
5V , 2A
Input (Lamp unit):
5V
Class 2 appliance