RAPTURE KRAIT Manuel D'instructions page 5

OVERVIEW
1
2
3
4
5
1. Left mouse button
2. Centre wheel
3. DPI button (resolution setting)
4. Side button forward
5. Side button backward
6. Right mouse button
7. Optical sensor (at the bottom of the mouse)
8. Backlight on/off button (at the bottom of the mouse)
INSTRUCTIONS
Installation
Insert the USB-A connector into the USB-A port of your
computer.
The mouse is installed automatically so you can control
the mouse quickly and comfortably.
Software
You can download the advanced mouse setup software
using the QR code provided below.
www.alzashop.com/rapture-software
Resolution setting
Adjust the mouse sensor resolution by repeatedly
pressing the DPI button. You can set the resolution from
800 to 16,000 DPI. The default setting is 1,600 DPI.
Set level of the sensor
resolution
800 DPI
1,600 DPI
2,400 DPI
3,600 DPI
5,000 DPI
16,000 DPI
Backlight On/Off
Briefly press the button at the bottom of the mouse to
turn on the backlight. Press again to turn the backlight off.
6
7
8
Color backlight
Red
Orange
Blue
Yellow
Cyan
Purple
CLEANING
Keep the mouse clean. Before cleaning, disconnect the
USB-A connector from your computer.
USE only dry and clean cloth for cleaning. Do not use
harsh cleaners, solvents, gasoline or other similar sub-
stances. Never wash the mouse with water and do not
immerse it in water.
ENGLISH 5