Publicité
Vehicle Vin must be updated with the sales code of the added accessory in order to
enable system functionality. Using the DealerCONNECT website and a StarSCAN
diagonstic tool, complete the procedure below:
• Log on to https://dealerconnect.chrysler.com
• In the "Vehicle Option" screen under the "Global Claims System" category in the
"Service" tab, enter vehicle VIN and add sales code(s) noted below as a "Dealer
Installed Option".
RSP (Hands Free Module)
• Confirm that the new sales code has been successfully added to the VIN.
• With the StarSCAN diagnostic tool connected to both the internet (via Ethernet port
or wireless connection) and the vehicle, follow the steps below:
IN THE INITIAL START UP SCREEN
• PRESS------------
• TOGGLE DOWN AND HIGHLIGHT----
START
• PRESS-------
• PRESS-------
NEXT>
• IF NECESSARY, SELECT PROPER VEHICLE LINE AND MODEL YEAR AND PRESS---
• CONFRIM CORRECT SELECTION AND PRESS---
• ENTER VEHICLE VIN USING ON -SCREEN KEYBOARD OR CONFIRM THAT AUTO-FILLED
VIN PLATE AND PRESS-----
OK
• PRESS---------
• ENTER USER ID, PASSWORD AND DEALER CODE USING ON-SCREEN
KEYBOARD AND PRESS-------
• WAIT FOR VEHICLE CONFIGURATON DATA TO BE DOWNLOADED AND THEN PRESS--
• PRESS------
NEXT>
• CONFIRM THAT VEHICLE CONFIGURATION HAS BEEN PROGRAMMED SUCCESSFULLY
• NOTE ON-SCREEN INSTRUCTIONS AND PRESS--------
9
10-31-2006
VEHICLE PREPARATION
RESTORE VEHICLE CONFIGURATION
NEXT>
OK
NEXT>
FINISH
5 of 33
NEXT>
NEXT>
K6859725
Publicité
