Digitus DN-50021 Mode D'emploi page 2

Table of Contents
Chapter 1 Introduction ........................................................................... 2
1.1 Features ....................................................................................... 2
1.2 Environments .............................................................................. 2
1.3 Package ....................................................................................... 3
Chapter 2 Installation ............................................................................. 3
2.1 Front Panel LEDs ........................................................................ 3
2.2 Back Panel and Side Panel Features ........................................ 3
2.3 Connecting Network Devices .................................................... 3
Congratulations on your purchase of this
and configuring this product can be found in this manual. Before you install and use
this product, please read this manual carefully for full exploiting the functions of this
product.
The 10/100Mbps switch is the perfect way of integrating 10Mbps Ethernet and
100Mbps Fast Ethernet devices. All eight ports are auto speed negotiating, and have
automatic MDI/MDI-X crossover detection, so you don't have to worry about the cable
type. Each port independently negotiates for best speed and half- or full-duplex mode,
for up to 200Mbps of bandwidth per port. Fast store-and-forward switching prevents
damaged packets from being passed on into the network.
1.1 Features
• Eight 10/100BASE-T Ethernet Ports
• Support Auto-Negotiation for 10/100Mbps
• Support Auto-MDI/MDIX for each port
• Support Full/Half duplex transfer mode for 10/100Mbps
• Complies with IEEE 802.3、IEEE 802.3u
• Perform forwarding and filtering at non-blocking, full-wire speed
• Built-in high-efficiency SRAM for packet buffer and 1K-entry look-up table
• Supports IEEE 802.3x for full-duplex flow control and back pressure for
half-duplex flow control
• Support packet lengths up to 1536 bytes
• Support Store-and-Forward switching method
• Support Broadcast Storm Filtering Control
1.2 Environments
• Storage Temperature: -40oC ~70oC
• Operating Temperature : 0oC ~40oC
• Storage Humidity: 5% ~90% RH Non-condensing
• Operating Humidity: 10% ~90% RH Non-condensing
Chapter 1 Introduction
10/100Mbps switch. Instructions for installing