Feiss I Light Floor Lamp Instructions D'assemblage

Assembly Instructions for
1 Light Floor Lamp
Floor Lamp
G ENERAL RODUCT NFORMATION P
This product is suitable for dry locations only.
1A
FINIAL
SHADE
THREADED NIPPLE
SOCKET
UPPER STEM
THREADED ROD
WASHER
Install the marble plate to the lower stem by inserting the threaded rods into the holes on the lower stem.
1
Install the upper stem to the marble plate by inserting the threaded rods into the holes on the marble plate and lower
2
stem. Place the washers on the threaded rods and tighten all the nuts with the provided wrench to secure them.
3 Place the harp into the yoke.
4
Install lamp by screwing it into the socket. Refer to the label on the lamp socket for Max Wattage information.
5 To install the shade, first unscrew the finial from the harp and remove the washer. Place the shade over the threaded
nipple, reinstall the washer, and secure in place by reinstalling the finial.
I :
3
HARP
4
1
2
NUT
IMPORTANT SAFETY INSTRUCTIONS
This portable lamp has a polarized plug (one blade is wider
than the other) as a safety feature to reduce the risk of
electric shock.This plug will fit in a polarized outlet only
one way. If the plug does not fit fully in the outlet, reverse
the plug. If it still does not fit contact a qualified electrician.
Never use with an extension cord unless plug can be fully
inserted. Do not attempt to defeat this safety feature.
WASHER
5
YOKE
MARBLE PLATE
WRENCH
LOWER STEM
1
FL6314_
UPPER
STEM HOLES
MARBLE PLATE HOLES
FL6314
1.0