Automatic Cooking; Stop&Go Function; Recall Function - INDU+ IDP401Z Mode D'emploi Et D'installation

Automatic cooking

All the cooking zones are equipped with an automatic cooking device. The cooking zone starts at
full power for a certain amount of time, then automatically reduces its power until it reaches the
pre-selected power level.
• Start-up:
Action
Power level selection
(for example « 7 »)
• Switching off the automatic cooking:
Action
Power level selection
Stop&Go function
This function temporarily puts an end to the hob's entire cooking activity, and allows restarting
with the same settings.
• Start up/stop the stop&go function:
Action
Engage stop&go
Stop stop&go

Recall Function

After switching off the hob [ 0/I ], it is possible to recall the last settings.
• cooking stages of all cooking zones (Booster)
• minutes and seconds of programmed cooking zone-related timers
• Keep warm function
• Automatic cooking
The recall procedure is the following:
• Press the key [ 0/I ]
• Then press [ II ] before the light stops blinking.
The previous settings are activated again.
Control panel
slide on the "SLIDER" to [ 7 ]
and stay 3s
Control panel
slide on the "SLIDER"
Control panel
press [ II ]
press [ II ]
Press on the animated "slider"
66
Display
[ 7 ] is blinking with [ A ]
Display
[ 0 ] to [ 9 ]
Display
[ II ] and control light on
"Slider" animated
previous settings