Electrical Safety; Electromagnetic Fields (Emf) - Blaupunkt WM2000 Mode D'emploi

ELECTRICAL SAFETY

• The main plug must fit the socket. The plug may not be modified in any way. Do not use adaptors with earthed
equipment. Unmodified plugs and appropriate sockets reduce the risk of electric shock.
• Avoid bodily contact with earthed objects (such as pipes, radiators, ovens and refrigerators). There is an increased risk
of electric shock when your body is earthed.
• Keep the power tool out of rain and wet environments. Water increases the risk of electric shock.
• Do not use the main cable for purposes for which it is not intended, such as carrying or hanging up the power tool and
do not pull the cable to disconnect the tool or the charger from the mains. Protect the cable from heat, oil, sharp edges
and moving parts.
• Damaged or twisted cables increase the risk of electric shock. Damaged mains cables must be replaced using original
Blaupunkt replacement parts Main cables may only be replaced by the manufacturer, an authorised service centre or
qualified person.
• Check extension cables regularly for signs of damage. Damaged extension cables must be replaced. Cable reels should
only be used when fully unwound.

ELECTROMAGNETIC FIELDS (EMF)

• This Power Tool complies with all standards regarding electromagnetic fields (EMF). lf handled properly and according
to the instructions in this user manual, the Power Tool is safe to use based on scientific evidence available today.
DANGER
• Never soak/immerse the power tool in water or any other liquids.
• Do not put cleaning detergents, vinegar or other cleansers on to the power tool.
• Do not use chemically processed water.
WARNING
• Check if the voltage quoted on the model plate of the power tool is suitable for the local mains voltage before
connecting the Power Tool to the mains.
• DO NOT use if the Power Tool has signs of damage to the mains plug / cable, casing or if the Power Tool itself is
damaged). lf the Power Tool leaks or is cracked DO NOT use.
• Please contact Blaupunkt if your Power Tool is damaged.
• Do not allow the Power Tool to run unattended. Always switch the Power Tool off and unplug from the mains when
not in use. Do not leave the power tool until it has come to a complete stop. - DO NOT LEAVE THE POWER TOOL
UNATTENDED IN THE PRESENCE OF CHILDREN OR ANIMALS.
• Keep children far from the area where you are working and DO NOT allow children to drag / pull the power cable, this
could cause serious injury.
• Do not use other high-power electrical Power Tools on the same circuit, this will help prevent overload.
• Always place and use the Power Tool on a stable, level and horizontal surface.
• Disconnect the power tool from the mains switch in the locked off position before making any adjustments, changing
accessories, or storing the power tool. Such preventative safety measures reduce the risk of starting the power tool
accidentally.
• Use clamps or another practical way to secure and support the work piece to a stable platform. Holding the work by
hand or against your body is unstable and may lead to a loss of control.
• Maintain / clean power tools with care
• Use only accessories that are recommended by the Blaupunkt for your model. Accessories that may be suitable for one
power tool may create a risk of injury when used on another power tool.
All manuals and user guides at all-guides.com
EN