CLAS OP 0082 Manuel D'instructions page 7

OP 0082
METAL CASE REEL Ø8mm
• Otherwise, the reel can use vertically when you hang in an overhead suitable beam or rafter.
• The wall mounting bracket consists of three parts; the two fasteners and bracket. Use the attached
two fasteners to af x the brackets. The mounting bracket has two holes, To the two holes on both ends
there is a M8 screw corresponds. Each screw must be with spring washer or padding, ensure all parts are
locked in position.
• A quick hook is attached for your option, use this, you can very convenient to x it to the wall or
other object.
3. Screw the attached plug of coupler (3) to the inlet connecter; inset the socket of coupler (4) from the
source of air to the plug of coupler.