OXFORD BABY 12137 Instructions D'assemblage page 3

THIS STEP REQUIRES :
A. Dresser (1 pc)
B. Feet (4 pcs)
C. Center leg (1 pc)
STEP 1:
- Open a drawer and take the feet.
- Place the dresser lay on its back.
- Attach feet to dresser bottom frame through pre-assembled dowels.
- Secure feet by using Allen bolt (D), Spring washer (E). Tighten all bolt with Allen key (F).
- Attach Center leg (C) to dresser support bar by turning clockwise. Adjust center leg leveler to
accommodate for uneven floor. Flip back the dresser. Complete assembly as shown in FIG.1.
100-12137-V-01
STEP 1 "ASSEMBLY OF DRESSER"
(F) Allen key (1 pc) (length may vary)
(D) Allen Bolt 3-1/2" (90 mm) (4 pcs)
E
D
F
(E) Spring washer (4 pcs)
A
C
FIG.1.
3 of 3
B