Oxygenics POWERSELECT Installation

P
OWER
EASY INSTALLATION
INSTRUCTIONS
STEP 1 STEP 2
Remove your Remove any
existing shower remnants of old
head. To remove, plumber's tape
turn the existing and flush out
shower head in a shower pipe for
counterclockwise 5 to 10 seconds.
direction.
STEP 4 STEP 5
In a clockwise Attach grooved
direction, screw end of hose
handheld holder to handheld
onto the taped holder and hand
portion of shower tighten.
arm. Hand
tighten only.
EASY TWIST
SPRAY SELECTION
Enjoying multiple spray patterns during your shower
has never been easier. With the PowerSelect's easy
twist design, simply rotate the easy spray selector for
a quick spray change.
S
ELECT
STEP 3
Wrap plumber's umber's
tape clockwise lockwise
3 or 4 turns 4 turns
around threaded und threaded
end of shower nd of shower
arm. arm.
STEP 6
Attach smooth end
of hose to base
of handheld and
hand tighten. Insert
your new handheld
shower in holder.
STOP!
NEED HELP?
PLEASE DO NOT RETURN THIS
PRODUCT TO THE STORE.
If you need installation assistance, replacement
parts or have questions regarding our warranty
please contact customer service at
1.888.580.9762
Support is also available via email at
support@oxygenics.com
Be sure to visit our website at
www.oxygenics.com
Business Hours:
Monday - Friday 7:00 am
to 4:30 pm PST
For use with automatic
compensating valves
rated at 1.31 GPM
(4.97 L/min) or less.