Publicité
ENG Manual LED FLOODLIGHT EVOLVE2
Mounting:
Open the packaging and check the product. In case of damage,
contact your distributor immediately.
Disassemble the bracket or place it in the desired position. The unit
can be easily aimed thanks to the degree indicator on the unit and
the toolless adjustment screws.
Take into account the weight of the device. Preferably use solid
wood threaded bolts, e.g. 80x6mm and 8mm plugs.
Always use two bolts per unit!
Electrical connection:
The unit is supplied with one pre-assembled M20 cable gland.
When using through-wiring, the M20 locking plug can be replaced by an
additional M20 cable gland. (Order reference: EV2M20)
Unscrew the two screws to open the connection box.
L
PE
N
Mounting possibilities:
The Evolve2 floodlight is suitable for placement on horizontal or vertical surfaces. The mounting height
depends on the area you want to illuminate and the power of your projector.
Various mounting accessories are available: wall bar, ground pin, pole attachment, louvre.
Installation and maintenance must be performed by professionals only.
The light source of this luminaire is not replaceable; when it reaches its end of life the whole luminaire shall be replaced.
Damaged luminaires in original and unopened packing are exchanged under warranty.
For outdoor applications, always use strong stainless steel studs and ensure firm anchoring.
The ground wire must be well connected to prevent safety problems.
Always check if the appropriate connection voltage is present.
Utilization of used lamps
LED lamps must be disposed of in accordance with current regulations concerning environmental protection. Used lamps should be returned
to the applicable collection point, where they will be accepted free of charge. Proper utilization of equipment enables preserving valuable
environmental resources and avoiding adverse impacts on health and the environment, which may be threatened by inappropriate waste
handling.
Integratech bvba – Groenstraat 48 – BE3270 Scherpenheuvel - Belgium
# on circuit breaker
Screws connectionbox
P
Type C
Type D
12/25W
40
70
45W
30
60
75W
4
7
100W
7
11
150W
7
11
200W
3
5
240W
1
2
locking
Connection voltage 100~240VAC
plug
50/60Hz.
M20
Connection: brown=phase
Energy class
blue=neutral
Yellow/green=earth connection
D
120°
30/60/AS
25W
cable
gland
M20
E
150W
45W
75-100W
Volgens de ecodesign richtlijn 2009/125/
EG is dit verlichtingsarmatuur niet
onderworpen aan een energielabel.
Ga voor informatie over de
productprestaties naar https://
www.integratech.be
Selon la directive 2009/125/CE dite
écoconception, ce luminaire n'est pas
soumis à l'obligation d'étiquetage
énergétique.
Retrouvez la performance porduit en
téléchargeant la fiche technique sur le
site https://www.integratech.be
According to the Ecodesign Directive
2009/125/EC, this lighting fixture is not
subject to energy labeling.
For information about product
performance, please visit https://
www.integratech.be
200-240W
Publicité
