AmazonBasics B00LRK8IV0 Manuel D'instructions page 6

Charging your power bank
1
1. Plug the small connector on the
included USB charging cable into the
micro USB port on your power bank.
2. Plug the large connector on the cable
into a power source, like an AC power
adapter (not included) or a USB port on
a computer. The LEDs flash from left to
right, then one of the LEDs stays on to
indicate the current battery level. When
charging is complete, all the LEDs stay
lit.
Note: When the LED on the far left is
blinking, you need to charge your power
bank.
6
2
OR