Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
NEVER LEAVE THE HEATER
UNATTENDED WHILE BURNING!
E.) PHOTOCELL
CLEAN PHOTO CELL ANNUALLY OR AS NEEDED.
- Remove upper shell(See Page 9)
- Remove photocell from photocell Bracket and disconnect photocell from connector.
- Clean photocell lens with cotton swab.
- Inspect photcell lens for damage. If damaged, replace photocell.
F.) FUEL LINES
TIGHTENING FUEL LINES ANNUALLY OR AS NEEDED.
- Remove upper shell (See page 9).
- Remove fan guard (See Figure 11)
- Use 1/4" wrench and tighten fuel lines(A) at solenoid valve
and at pump. (See Figure 12)
- Use 3/8" wrench and tighten fuel lines (B) at pump, pump fuel filter assembly.
- Reinstall fan guard.
F
g i
u
e r
1
. 1
R
e
m
Figure 10. Clean photocell Lens
FAN GUARD
o
e v
F
a
n
g
u
a
d r
PHOTOCELL BRACKET
PHOTOCELL
PHOTOCELL LENS
SOLENOID VALVE
FUEL LINE(A)
F
g i
u
11
CONNECTOR
INSTALL PHOTOCELL
1)INCORRECT
2)CORRECT
FUEL LINE(B)
e r
1
. 2
T
g i
t h
n e
u f
l e
i l
e n
PUMP
Publicité
Table des Matières
Dépannage
