Télécharger Imprimer la page

Venture Lighting SELECT-PRO Manuel Utilisateur

Publicité

Les langues disponibles

Les langues disponibles

Liens rapides

V
L
ENTURE
IGHTING'S
Before You Begin
Read These Instructions Completely and Carefully
UNPACKING
Unpack and carefully examine the product.
Report any damage and save all packing materials if any part(s) were damaged during shipping.
Do not attempt to install or use this equipment if it is damaged.
INCLUDED IN THIS BOX
LED fixture
Mounting hardware
Installation instructions
WARNING
Failure to follow these instructions or altering equipment could result in injury or damage and void warranty. Venture assumes no liability for
injury, damages or losses of any kind that may arise from the improper, careless, or negligent installation, handling or use of this product.
This equipment must be installed and serviced per applicable codes and ordinances by qualified personnel (ex. licensed electrician) familiar with
the operation of the product and any hazards involved.
Disconnect power to the equipment and allow to cool before installing or servicing.
Handle sharp edges with care. To prevent wiring damage, do not expose wiring to sharp edges.
Verify that all electrical connections have been properly made and the fixture is grounded to avoid potential electrical shocks.
It is the installers responsibility to confirm the proper input voltage is used with the equipment.
Do not handle energized equipment when hands are wet, when standing on wet surfaces, or in water.
This fixture must be mounted securely to a structure to support the weight.
SUPPLIER'S DECLARATION OF CONFORMITY (SDoC)
This equipment complies with the limits for a Class A digital device, pursuant to Part 15 Subpart B of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interference when the equipment is operated in a commercial, industrial or business
environment.
This equipment complies with the limits for a Class A lighting equipment, pursuant to Innovation, Science and Economic Development Canada's
CAN ICES-005 (A) / NMB-005 (A).
For warranty information refer to www.venturelighting.com/resources/warranties.
LED C
AN OPY
RISK OF FIRE, ELECTRIC SHOCK, INJURY, OR PROPERTY DAMAGE
F
IXTURES

Publicité

loading

Sommaire des Matières pour Venture Lighting SELECT-PRO

  • Page 1 LED C ENTURE IGHTING’S AN OPY IXTURES Before You Begin Read These Instructions Completely and Carefully UNPACKING Unpack and carefully examine the product.  Report any damage and save all packing materials if any part(s) were damaged during shipping.  Do not attempt to install or use this equipment if it is damaged.
  • Page 2: Important Safety Information

    IMPORTANT SAFETY INFORMATION Operating temperature: -40°C to +40°C (-40°F to 104°F).  Suitable for use in wet locations.  All wiring and connectors used with this equipment shall be rated a minimum of 90°C (194°F)  Installation Instructions – Surface Mounting 1: Disconnect power from the luminaire and follow proper lockout/tagout procedures before beginning installation or maintenance.
  • Page 3 Wattage CCT & Photocell Figure 2 Figure 1 Figure 3 Figure 4 Figure 5 Figure 6 (800) 451-2606 VentureLighting.com ⚫...
  • Page 4: Avant De Commencer

    LED C ENTURE IGHTING’S AN OPY IXTURES AVANT DE COMMENCER LISEZ CES INSTRUCTIONS COMPLÈTEMENT ET ATTENTIVEMENT DÉBALLAGE Déballez et examinez soigneusement le produit.  Signalez tout dommage et conservez tous les matériaux d'emballage si des pièces ont été endommagées pendant le transport. ...
  • Page 5 IMPORTANT SAFETY INFORMATION Température de fonctionnement: -40°C to +40°C (-40°F to 104°F).  Convient pour une utilisation dans des endroits humides.  Tous les câbles et connecteurs utilisés avec cet équipement doivent être évalués à un minimum de 90°C (194°F). ...
  • Page 6 Puissance CCT et photocellule Figure 2 Figure 1 Figure 3 Figure 4 Figure 5 Figure 6 (800) 451-2606 VentureLighting.com ⚫...