Westinghouse HYBLU BTM-51188 Manuel D'instructions page 7

TRANSMITTER PAIRING
The Westinghouse Bluetooth sockets feature Hybrid
technology which allows you to control them with a
wireless handheld remote control. This feature is great for
children, guests or when a smartphone is inaccessible.
Handheld remotes that are packaged with your Bluetooth
socket are paired at the factory. If for some reason it
needs to be paired again, follow the steps below:
1. Located the Manual on/off
override button on the
Bluetooth socket
2. Press and hold the button
for 5 seconds
3. The button will begin to flash red
4. Press the "ON" button on the
handheld remote.
5. Your remote is now paired
to the socket.
PAIRING ADDITIONAL DEVICES TO ONE REMOTE
Because your handheld remote has 4
sets of buttons, you can pair additional
Bluetooth sockets and control them
from one remote.
Follow the steps above for each socket
while pressing the next set of buttons.
This will add your socket to the next set
of buttons.
You can Program all your socket to
turn on/off at the same time. Simply
pair each socket to the last set of
buttons indicated as ALL. Follow the
steps above to pair each socket to the
ALL ON/OFF buttons.
To remove all paired remote controls from you receiver:
Press ON/OFF button and hold 8 seconds.