Smith 27660 Instructions Pour L'assemblage

TOOLS REQUIRED
2 9/16" wrenches. A variable
speed drill with a 9/16" deep
socket driver is helpful. (optional)
Wind and current can make loading a
boat diffi cult. Missed approaches result
in fl ared tempers and even boat damage.
SMITH SHORT BUNK GUIDE-ONS solve
all that by holding the boat centered over
the trailer for a perfect retrieval every time!
● U-bolts may be installed straight or crossed as needed to best fi t
the width of the frame.
● Height can be adjusted by mounting the uprights above or below
the trailer frame and by choice of bunk mounting hole in the
upright.
● Usually guide-ons are more effective when mounted as far to the
rear as possible and within 2" of the boat.
● Adjust the swivel brackets to best match the boat's shape.
Assembly and Mounting Instructions
for Short Bunk Guide-Ons 27660
cesmith.com
straight U-bolts
27660 mounted on a typical
jon boat trailer
crossed U-bolts
PARTS LIST: 27660
2 uprights 27609PG
2 U-brackets 27603PG
2 upright plugs 11332
2 bolts 11025
10 nylon locknuts 10810
12 washers 10960
2 5" U-bolts 15258
2 5" formed U-bolts 15259
Pre-Assembled:
2 carpeted bunks 27831
4 swivel brackets 10201PG
8 screws 10942
00240 rev 12-2014