Table des Matières
Publicité
Modbus RTU / BACnet MS/TP avec point de consigne analogique
(mode hybride)
Fonctionnement du MP-Bus
Éléments d'affichage et de commande
www.belimo.com
Fiche technique
2
Push-button and LED display green
Off:
No power supply or malfunction
On:
In operation
Flashing:
In address mode: Pulses according to set address (1...16)
When starting: Reset to factory setting (Communication)
Press
In standard mode: Triggers angle of rotation adaptation
button:
In address mode: Confirmation of set address (1...16)
3
Push-button and LED display yellow
Off:
Standard mode
On:
Adaptation or synchronisation process active
or actuator in address mode (LED display green flashing)
Flickering:
BACnet / Modbus communication active
Press
In operation (>3 s): Switch address mode on and off
button:
In address mode: Address setting by pressing several times
When starting (>5 s): Reset to factory setting (Communication)
4
Manual override button
Press button:
Gear train disengages, motor stops, manual override possible
Release button:
Gear train engages, standard mode
5
Service plug
For connecting parametrisation and service tools
Check power supply connection
2
Off and
3
On
EP050+ARX-E N4 • fr-ca • 2023-02-03 • Sous réserve de modifications
Possible wiring error in power supply
EP050+ARX-E N4
7 / 9
Publicité
Table des Matières
