Assembly videos / Vidéos d'assemblage
Scan this QR code or watch the video in the assembly section of the product page on our website.
Scannez ce code QR ou consultez la section assemblage de la fiche du produit sur notre site internet.
WWW.AMISCO.COM
Questions? Contact us! / Des questions? Contactez-nous!
Monday to Friday, from 8:30 a.m. to 12 p.m., 1 p.m. to 4:30 p.m. (Eastern standard time).
Keep handy your proof of purchase, the Amisco product number and the product label.
Du lundi au vendredi, de 8h30 à 12h00, 13h00 à 16h30 (heure de l'Est).
Ayez en main votre preuve d'achat, le numéro de produit Amisco et les étiquettes du produit.
1 800 361-6360
2 PEOPLE
2 PERSONNES
- A phillips screwdriver or wireless screwdriver.
- An allen key 1/8" (included).
- A measuring tape or ruler.
- A mallet.
PARTS LIST / LISTE DES PIÈCES
ITEM
DESCRIPTION
Base frame
1
Cadre de la base
Fixed Leg
2
Patte fixe
Leg with wheels
3
Patte avec roulettes
Hardware
4
Sac de quincaillerie
The model illustrated may differ from the model bought. The assembly method remains the same.
Le modèle illustré peut être différent du modèle acheté. La méthode d'assemblage demeure la même.
1.1) Put on a large blanket to protect the finished surface.
1
Placer sur une grande couverture pour protéger le côté fini.
1.2) Remove the plastic film which maintains the base frame closed.
Détacher la pellicule plastique qui tient le cadre de la base fermé.
1.3) Unlock each side.
Débarrer chaque côté.
Round holes up.
Trous rond vers le haut.
2.1) Align the 4 holes of the fixed leg
3
Aligner les 4 trous de la patte fixe
2.2) Screw lightly. Visser légèrement.
2.3) Screw firmly all bolts. Visser fermement tous les boulons.
2.4) Repeat steps 2.1 to 2.3 for leg with wheels
Répéter les étapes 2.1 à 2.3 pour la patte à roulettes
2
8 X
TABLE ASSEMBLY
ASSEMBLAGE DE LA TABLE
WWW.AMISCO.COM
You will need / Vous aurez besoin
HARDWARE LIST / LISTE DE QUINCAILLERIE
QTY
ITEM
A
1
B
1
C
1
D
1
E
.
2
.
2
.
3
.
3
A
3
1
(TOP NOT INCLUDED)
(DESSUS NON-INCLUS)
- Un tournevis cruciforme ou un tournevis sans fil.
- Une clé allen 1/8" (incluse).
- Un ruban à mesurer ou règle.
- Un maillet.
DESCRIPTION
Bolt
Boulon
Wood screw
Vis à bois
Set screw
Vis d'ajustement
Nut
Écrou
Cover cap
Capuchon
2.1) Extend the frame.
2
Allonger le cadre.
2.2) Align holes and locking brackets.
Aligner les trous et les barrures.
2.3) Lock each side.
Barrer chaque côté.
1
Put table on its legs.
4
Mettre la table sur ses pattes.
M656480320
Revision: 04,
24-01-2023
Problem ? / Problème ?
Let us help you,
PLEASE DO NOT RETURN
YOUR PRODUCT.
Laissez-nous vous aider,
S.V.P. NE RETOURNEZ PAS
VOTRE PRODUIT.
QTY
2" 1/4-20nc
7/8" #10
4/6
3" 1/4-20nc
1/4-20nc
8
6
6
6
1