Déclaration Du Fabricant; Réparation; Electricity Supply - Linak Deskline Baselift Manuel Utilisateur

Réparations
Pour éviter tout risque de dysfonctionnement et conserver la garantie du produit, toutes les réparations des
®
produits DESKLINE doivent être effectuées par des ateliers et réparateurs agréés par LINAK.
Attention! L'ouverture des produits DESKLINE
Attention! Les systèmes DESKLINE
DECLARATION OF INCORPORATION OF PARTLY COMPLETED MACHINERY
Herewith declares that LINAK DESKLINE
Control Boxes
And
Linear Actuators
Lifting Columns
And
Desk Panels
RF Controls
And
Accessories
comply with the following parts of the Machinery Directive 2006/42/EC, ANNEX I,

1.5.1 Electricity supply

The relevant technical documentation is compiled in accordance with part B of Annex VII and that this
documentation or part hereof will be transmitted by post or electronically to a reasoned request by the
national authorities.
This partly completed machinery must not be put into service until the final machinery into
which it is to be incorporated has been declared in conformity with the provisions of the
Machinery Directive 2006/42/EC where appropriate.
Nordborg, 2014-04-10
® ne supportent pas l'huile de coupe.
LINAK A/S
Smedevænget 8
DK - 6430 Nordborg
®
products as characterized by the following models and types:
CBD4, CBD5, CBD6, CBD6S
LA31, DB4, DB5, DB6, DB7, DB9, DB12, DB14, DB16, LA23
DL1A, DL2, DL4, DL5, DL6, DL7, DL8, DL9, DL10, DL11, DL12, DL14, DL15,
DL16, DL17, LP2, LP3, BASE1
DP, DPA, DPB, DPH, DPF, DPT, DP1C, DP1K, DP1L, DP1V, DP1U, WDPL1
HB10, HB20, RFR and RFT
SLS
LINAK A/S
John Kling, B.Sc.E.E.
Certification and Regulatory Affairs
Authorized to compile the relevant technical documentation
® peut provoquer des dysfonctionnements
:
Page 9 sur 32