Publicité
Les langues disponibles
Les langues disponibles
Step I, Step II and the SpaceSaver
Install the step on a flat surface.
Do not jump or dive from the step.
Remove the step from water when temperatures drop below freezing.
In winter, the step should be stored in an area protected from snow.
Never lift the step by its handrails.
Use BATTERY operated tools to avoid electric shock near water.
Ensure no corrosive materials are added to the step or harware kit.
The step must be installed per manufacturer's instructions.
File off all stripped or sharp edges before assembly to avoid injuries
and liner damage.
The manufacturer is not responsible for damages or injuries caused
by improper installation or use of product.
To ease the installation of handrails and bolts, use a screwdriver to
line up the holes.
Maximum weight: 400 lbs / 180 kg.
1) Insert half of the
Step Cup
TM
mushroom
in the hole, at a 45
degree angle.
STEP INSTALLATION
1. Install the
Step Cups as
described
above.
2. Insert the
sandbag in the
sealable bag
provided.
Remove air
before inserting
in the step.
WARNING
STEP CUPS INSTALLATION
Lorem ipsum
2) With a flat screwdriver,
compress the
Step Cup
TM
mushroom ring while pushing it
into the hole.
STEP 1
STEP 2
1. Slide the
step into the
pool, submerge
slowly.
2. Locate the
step in the pool.
3. Keep a gap
of 1'' between
the step and
the pool wall.
2257 route 139
Drummondville, Québec
J2A 2G2
WWW.INNOVAPLAS.COM
3) Twist the
Step Cup
to
TM
ensure that its mushroom
has entirely cleared the wall
thickness. If it has, the
suction cup should rotate
freely.
SPACE-SAVER
No ballast
required fot this
step.
1. Insert the
handrails in
place. Use a
nail to mark the
holes to drill
into the
handrails.
2. Remove the
handrails and
drill the holes
with a 1/8'' drill
bit.
REV. 02/07/2023
Tools required (not included)
Nail
1/8 drill bit
Sand
(not included)
Contents hardware bag
SCREW KIT 140-0035
x8
x2
x6
Fasten the handrails and
flanges with the screws
provided
MANUFACTURER WARRANTY
1 year on pool step.
1 year on hardware.
PN: 110-0018
x6
x4
x2
PG:1
Publicité
