Troubleshooting Guide; Product Disposal - UFESA SMART DIGITAL Serie Mode D'emploi

TROUBLESHOOTING GUIDE

PROBLEM
Unit fails to heat up and
steam. Power indicator
light does not illuminate.
Water runs out of the
holes in the soleplate.
Brown streaks come
through the holes in the
soleplate and stain the
linen.
There is no steam or
there is little steam.

PRODUCT DISPOSAL

This product complies with European Directive 2012/19/EU on electrical and
electronic devices, known as WEEE (Waste Electrical and Electronic Equipment),
provides the legal framework applicable in the European Union for the disposal
and reuse of waste electronic and electrical devices. Do not dispose of this pro-
duct in the bin, instead going to the electrical and electronic waste collection
centre closest to your home.
20
POSSIBLE CAUSE
Unit is not plugged in.
Water has condensed in the
pipes because you are using
for the first time or you have
not used it for some time.
The soleplate is not hot
enough.
You are using chemical des-
caling agents or addititves in
the water for ironing.
The water tank is empty.
The soleplate is not hot
enough.
SOLUTION
Plug into electrical outlet.
Press the steam trigger
away from your ironing
board until the iron produ-
ces steam.
Wait until the iron solepla-
te is hot enough
Never add this type of pro-
duct in the water tank or in
the steam chamber.
Fill the water tank.
Wait until the iron solepla-
te is hot enough