ICF PYLA MESH Mode D'emploi page 21

and wipe it on evenly, paying particular attention to high use areas. We recommend fully cleaning and
protecting your furniture 2-3 times per year.
Mesh
A fabric is considered dirty when it shows visible marks. These are usually the result of a progressive built
up of dirt or dust as a result of the normal use.
ICF mesh is highly dirt resistant for three reasons:
- thread covering, thanks to extrusion technique, is smooth and no porous look to the thread
- it is not susceptible to static electricity, so the mesh doesn't attract dust
- the protective thread covering was formulated to be resistant to humidity and to micro-organisms
growth.
For normal maintenance and cleaning:
- dust fabric with vacuum cleaner or with a soft brush
- wash with a soft brush or with a sponge using a solution of water and detergent
- rinse a lot with water
- let the mesh dry in open air
Aluminium
To preserve the brillant finish, regularly wipe with a soft clean cloth using only mild soap and water.
Plastic material
For normal maintenance and cleaning use a soft clean cloth with water and normal soap.
An updated list of colours and finishes is available on our web site www.icf-office.it
19