Canaropa DM Serie Instructions D'installation

A
Door preparation
1. Draw backset vertical line and lever/knob centerline on door.
2. Apply installation template on door, align backset vertical lines and
lever/knob centerlines.
3. Drill required holes as per supplied template.
B
Installation instructions
1. Insert bushing into outside escutcheon assembly.
2. Place spindle fixing assembly on outside escutcheon assembly, ensure side with long spindle is facing towards lever/knob.
2. Position outside escutcheon assembly in post holes on door (ensure lever handle is in horizontal position).
4. Using the posts of the outside escutcheon assembly as a guide, slide spindle fixing assembly on outside door.
5. Attach outside escutcheon assembly (lever/knob, top and bottom posts) to door using the machine screws and
finishing washers.
Cut-off post tip
for 1 3/4" thick door
Lever / Knob
(outside)
Backset vertical line
OUTSIDE
Horizontal line
Spindle fixing
assembly
Bushing
Long spindle side
INSTALLATION
INSTRUCTIONS
DUMMY
MORTISE LOCKSET
SINGLE
DM 171E ESCUTCHEON
Installation
template
C L
Lever / knob
Horizontal line
Backset vertical line
INSIDE
Flat head machine screws
1/4"-28
Flat head machine screws
#8-32 UNC
Finishing washers
Left hand outswing (left hand reverse) door
installation shown
See template for other handing installations
Door edge
Fold line
DM171E -TB -INS - EN-FR - 2015/05