Ashley Signature Design P456-776B Instructions De Montage page 8

IMPORTANT, FAILURE TO CAREFULLY READ, UNDERSTAND AND
FOLLOW EVERY PART OF THIS DOCUMENT MAY RESULT IN
PROPERTY DAMAGE, SERIOUS BODILY INJURY OR DEATH.
(with Propane Gas Confirguration)
1. With the help of another person, carefully place the table top onto the table base. After
making any necessary adjustments to the alignment of the table top and the base, use the
bolts, spring washers and washers as shown in Figure 3. Guide the bolt through the hole
in the base bracket into the pre-drilled hole on the underside of the table top. Do not
tighten completely.
2. Pour all of the lava rock into the burner pan. Completely cover the burner tube with fire
ice as shown in Figure . 4
3. Remove the cardboard cover from the ignition well as shown in Figure 5. Remove any
lava rock or fire ice on top of ignition well.
P456-776B/T
All manuals and user guides at all-guides.com
!
DANGER & WARNING
Outdoor Firepit Assembly
F
G
E
Figure 3
Figure 4
Cardboard cover
A
B
J
Figure 5
Page 8 of 12