Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Cleaning and Care
Teak Parts
•
Remove debris with a soft nylon bristled brush
•
Clean the surface using a sponge or damp cloth with water and mild soap.
•
Soak up any excess water with a microfiber or lint-free cloth
•
Allow the wood to dry naturally.
•
To help prevent staining on teak components, NewAge recommends applying Golden Care's Teak Shield
on our products. Follow the application instructions provided with Teak Shield.
•
The teak shield/coating/oil is only to help resist staining, it will not provide total protection. Any spills
should be cleaned immediately to avoid staining and no liquid should be left standing on the teak
surface for more than 15 minutes.
Oiling teak parts regularly can help preserve its original golden brown appearance.
Follow the below steps for oiling:
1. Place a cloth or newspaper beneath the teak parts to catch spills. Put on gloves to avoid getting oil on
your hand, which may cause skin irritation.
2. Clean the wooden parts with water and mild soap.
3. Dry the wooden parts after cleaning and leave them for 24–36 hours to remove all moisture before
applying the oil.
4. Apply teak oil by using a paint brush or a piece of cloth.
5. Wait fifteen minutes, then wipe down with a cloth.
6. Reapply every 6 months.
7
Publicité
Table des Matières
