Publicité
LETO 11
Pendant: Canopy Installation
1
Unscrew canopy from crossbar and
separate from bracket.
4
B
Loosen cable gripper and thread cable
through the gripper.
7
Cut excess aircraft cable, strip coating
and make connections using appropriate
hardware.
2
Rev March 13, 2020
2
Install bracket to junction box.
5
Push the threaded nut towards the bracket
to release the aircraft cable. Cycle cables
through gripper to relieve any twist in cable.
8
Slide canopy back over bracket and screw
in place.
PROUD MEMBER OF
5 YEAR
WARRANTY
Negative
3
Positive and negative markings can be
found on each of the fixture cable grippers.
6
Adjust aircraft cable to desired height and
tighten gripper.
MADE IN
CANADA
403-216-7043
Positive
|
info@sensolighting.com
Publicité
