monte carlo MC262 Serie Instructions D'installation page 3

1
Before you begin installing the fan, Switch
power off at Service panel and lock
service disconnecting means to prevent
power from being switched on
accidentally. When the service
disconnecting means cannot be locked,
securely fasten a warning device, such
as a tag, to the service panel.
4
Light pan
Partially install 2 set screws on the light
pan. Screws provided.
7
Light shade
Attach a light shade by locating dimples
in light pan with grooves on the light
shade and twist clockwise until tight.
© 2021 Monte Carlo Fan Collections
GENERAL INSTALLATON
2
Insulated sleeve
Blanking plate
Remove the blanking plate from fan by
turning counterclockwise.
5
LED light fixture
Connect white wire from fan to white wire
from LED light fixture and then connect
blue (or black) wire from fan to black (or
blue) wire from LED light fixture. Be sure
plugs connection clasped together firmly.
3
3
Insulated sleeve
Remove the insulated sleeve from light
lead wires.
6
Attach LED light fixture onto the light pan,
aligning the keyhole slots on the LED light
fixture with the screws on the light pan.
Twist clockwise till lock. Install the other
provided screw. Tighten all screws
securely.
1/2021