Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
All manuals and user guides at all-guides.com
POWER CONTROL
- To turn the unit on
·
Connect the supplied power adapter.
·
Press
STANDBY button to turn on the unit.
- To turn the unit off
·
Press
STANDBY button on the remote control or hold STANDBY button
the unit.
NOTE:
If the unit is not used for a long period of time, disconnect the power adapter.
TIME SETTING
1. Place the unit to standby mode.
2. Hold CLOCK button on the remote control to switch 12 or 24 hour system.
if in 12 hour system, when the time arrives 12:00, the "PM" will appear on display.
3.
CLOCK button on the remote control and the hour digit flashes.
Press
4.Then press TUN+ or TUN- button on the unit or remote control to adjust the hour.
5. Press CLOCK button on the remote control to confirm the hour setting and the minute
digit will flash.
6. Then press TUN
+ or
TUN - button on the unit or remote control to adjust the minute.
7. Press CLOCK button on the remote control to confirm the minute setting.
FM RADIO
Power on the unit and press
display.
- Search and store the stations
1. Hold TUN + or TUN - button to search stations
station is found. Then press FM SCAN button, "CHXX" will flash and then use
button to
select the place you want the station stored to. Press FM SCAN button to confirm. Or
2. Hold FM SCAN button then release the unit will search and store the stations automatically.
- Listen to the preset stations
Press M+ button repeatedly to select the desired preset stations to listen to.
MODE
button repeatedly until the FM frequency appears on the
forward or backward. The unit will stop if a
7
in the
front of
TUN + or TUN -
Publicité
Table des Matières
