Publicité
Les langues disponibles
Les langues disponibles
Connections
Speaker Components
(L) (R)
FRONT
STAND
(L) (R)
CENTER
SURROUND
SUBWOOFER
Installing the Speakers on the Tallboy Stand
1.
Turn the Stand Base upside-down and connect it
to the Stand.
2.
Insert small screws (4x20, For connecting Stand &
Stand Base) clockwise into the four holes marked
using a screwdriver as shown in the illustration.
!
CAUTION
When you use a torque screwdriver, be careful not
to put excessive force. Otherwise, it runs idle or
can be damaged. (torque screwdriver- below 15
kg.f.cm)
3.
Connect the upper Speaker to the assembled
Stand.
4.
Insert another large screw (5x15, For connecting
Speaker & Stand) clockwise into the hole on the
rear of the speaker using a screwdriver.
5.
This is the appearance after the speaker is
installed. Follow this steps to install other speaker.
20
English
HT-D5350_XAC_1226.indd 20
HT-D5350_XAC_1226.indd 20
Assembled Speakers
SCREW (5X15): 4EA
SCREW (4X20): 16EA
SPEAKER CABLE
STAND BASE
1
3
5
FRONT/SURROUND SPEAKER
2
Stand
Base
Stand
4
Speaker
Stand
CENTER SPEAKER
SUBWOOFER
2011-12-26
2011-12-26
11:55:13
11:55:13
Publicité
