GE WE16X29317 Instructions D'installation page 4

BOTTOM VENTING (cont.)
• Locate the 12-1/2" exhaust duct and elbow duct
from this kit and assemble together. Apply duct tape
around the joint to eliminate leaks between ducts.
12-1/2"
• Insert and connect the elbow/exhaust duct
assembly to the blower housing and insert the
elbow through the bottom knockout.
Installation Instructions
BOTTOM VENTING (cont.)
• Install the new access panel from this kit.
• Secure access panel with 4 screws saved from
earlier.
NEVER LEAVE THE BACK OPENING WITHOUT
THE ACCESS PANEL.
4
Printed in USA