Publicité
Les langues disponibles
Les langues disponibles
Parts & Hardware List
Number
Description
A
Table top
B
Leg
C
Supporting frame
AA
M6×20 Bolt
BB
M6 Spring washer
CC
M6 Flat washer
DD
M6×40 Bolt
EE
M6×15 Bolt ( preassembled)
FF
M6 Wrench
GG
Plastic pad (preassembled)
HH
Foot pad (preassembled onto B)
Fig.1: Place table top (A) upside down on a non-abrasive surface. Attach legs (B) onto table top (A) with a
bolt (AA), spring washer (CC) and flat washer (BB). Do not tighten at this stage.
Fig.2: Attach supporting frame (C) onto leg assembly (B) with a bolt (DD), spring washer (CC) and flat
washer (BB). Tighten all bolts fully. Turn the table upright – it is now ready to be used.
Maintenance:
1. Before using, clean the table completely with a soft dry towel.
2. Do not place your table in wet conditions where there is a risk of rust developing.
3. When your table is not being used, wipe free of any dirt or loose objects, wash with a mild solution of soap
and water; rinse thoroughly and dry completely. Do not use strong detergent or abrasive cleaners.
4. When not used, store in a cool, dry location away from sunlight.
Qty
1
4
1
16
20
20
4
16
1
8
4
Publicité
