Replacing The Battery - HAMPTON BAY 987508 Manuel D'instruction

Charging the battery:
For optimum performance, it is best to install the solar lights in
full sunlight and charge for 10-12 hours. Allow the light to run at
least 8-12 entire charging and discharging cycles to reach
battery's maximum capacity.

REPLACING THE BATTERY

For best performance, replace with rechargeable 1.2V Ni-CD
battery every year or when performance diminishes.
Step 1
Twist and remove lens (2) from top
housing (1). (FIG.4)
Step 2
Push the release tab and remove
the battery compartment cover.
Replace the old battery with a fresh
AA Ni-CD rechargeable battery.
Replace the battery compartment
cover and lens (2). (FIG.5 and
FIG.2)
CAUTION: CONTAINS NICKEL-CADMIUM
BATTERY. BATTERY MUST BE RECYCLED OR
DISPOSED OF PROPERLY.
4
⑴
⑵
FIG. 4
FIG. 5
⑴