Technical Data; Safety Instructions - auna AV3800USB Mode D'emploi

Dear Customer,
Congratulations on purchasing this equipment. Please read this manual carefully and take care of the
following hints on installation and use to avoid technical damages. Any failure caused by ignoring the
mentioned items and cautions mentioned in the operation and installation instructions are not covered
by our warranty and any liability.
Item number
Power supply
Power consumtion
Input Impedance
Input Sensitivity
Gain Difference
Left and Right Track Crosstalk Attenuation
Alt
Bass
SNR
Total Harmonic Distortion
Frequency Response (20Hz-20kHz)
Output power of Middle Track
Output power of Surrounding Track
Output power of Main Track
• Please place the machine under ventilated environment. Please do not place the machine under di-
rect sunshine ot heating source. Do not place the machine in closed frame. When installing the frame,
assure adequate ventilation holes for heat loss.
• Protect the power cord. Do not press the power cord with heavy objects or step on the power cord.
Do not pull and twist the power cord fiercely. Please hold the plug when pulling it from the socket.
• Prevent foreign objects falling into the machine. Prevent pin and coil falling into the machine for
avoiding damages
• Protect the machine from dampness, water and dust. Do not place the machine in environment with
high dampness or too much dust. Do not place vase or other containers with water onto the machine.
Do not expose the machine under rain or water.
• Do not clean the machine with volatile solvent. Do not use insecticide near the machine, do not wipe
the case with such chemicals as alcohol, coating, diluent, gasoline and thinner. Wipe off dust with
soft fabric.
• Do not jam the ventilation hole of the machine. lt may possibly damage the machine if the ventilation
hole is jammed. The ventilation holes are important for heat loss of the machine. It may cause the
temperature in the machine rise to extremely high level if the ventilation hole is jammed.
6
All manuals and user guides at all-guides.com

Technical Data

Safety Instructions

10005227
230 V ~ 50 Hz
600 W
47 kOhm
≤ 280mV
≤ 2dB
≥ 50dB
± 10dB
± 10dB
≥ 76 dB
< 0.3%
± 2dB
> 12W (4 Ohm)
> 12W (4 Ohm)
> 28W (4 Ohm)