Hardware Installation; Chassis Assembly - Rosewill RDEE-12002 Manuel D'utilisation

2.5" HDD/SSD Screw less External Enclosure RDEE-12002 User Manual

Hardware Installation

1. Chassis Assembly

Release the latch that holds the top and bottom covers of the enclosure
and slide the enclosure top cover towards to front.
(See Figure A-B)
Figure A
Figure B
2. Hard Drive Installation
Place the 2.5'' SATA hard drive into the enclosure and then slide the
hard drive connector into the SATA connector inside the enclosure, slide
the top cover of the enclosure back onto the frame of the enclosure.
3