Electrolux E9WHMIC1 Mode D'emploi page 71

Before proceeding to the next topic Daily use & care and cleaning, start
the short washing programme and follow it until the end. Be sure that no
leakages appear from the filter and its connections. In case of water
leakage, proceed as described in paragraph 8. Detach the filter assembly
from the wall support and tighten the collars. To reinstall the filter, repeat
the steps in paragraph 7.
1
3. DAILY USE & CARE AND CLEANING
WARNING!
Refer to Safety chapters.
WARNING!
Always switch off and check
that the machine is not
running before accessing or
cleaning the filter.
Filter cartridge is made with
thin Polyamide net in order
to catch the microfibres
released from the laundry
washing process.
1
2
2
click
8. If any water appears during first cycle, stop
the programme immediately. Turn the
washing machine OFF and unplug it from the
electrical socket. Before proceeding with the
detaching procedure, check that the filter
cover stays in the locked position in order to
avoid any water leakage while tightening the
collars.
Detach entire filter from the wall support:
1. Un-clip the filter from the wall support
using the screwdriver,
2. Hold the filter in your hand to tighten the
collar with the screwdriver.
Repeat the steps in paragraph 7 to install
filter.
After some washing cycles
the filter cartridge will clog
and must be cleaned
Number of cycles before the
activation of floater will
depend on several factors
(kind of textile, drum size,
most used programs, type of
cycles and duration, laundry
load, detergent, degree of
soiling, etc.).
ENGLISH
3
4
71