CMP DOCK EDGE Instructions D'assemblage

PART LISTING
ITEM DESCRIPTION
A Hand rail assembly
B 3 Step assembly
C 2 Step assembly
D 4 Step assembly
E 1/4" - 20 X 1.5" Phillips Pan Head Screws
F 0.5" Washers
G 1/4" - 20 Lock Nuts
Recommended Minimum Mounting Hardware (not included)
• 5/16" x 2-1/2" Lag bolts & washers (Set of 4) or Carriage Bolts,
nuts & washers (4)
IMPORTANT:
• Assemble hand rails to step assemblies prior to securing to the dock surface.
• Assemble tubing as per diagram making sure holes are aligned.
1. Fit hand rails A over the lower vertical sections of the step rail
tubes. B - 3 step, D - 4 step, B+C - 5 step, B+C+C - 7 step.
2. Align the holes in the hand rails with the holes in the step
assemblies and insert pan head screws E through the holes as
shown.
3. Thread a washer F and a lock nut G over the protruding
threads of the screw. Tighten securely and sufficiently to
engage the locking portion of the lock nut.
4. Place completed ladder assembly on dock in the desired
location. Ladder MUST be mounted with the step rails flush
to the dock face. Using the holes in the hand rail mounting
plates, mark mounting hole locations through the holes and
onto the dock. Remove the ladder assembly and drill pilot
holes in the locations marked for mounting the ladder onto
the dock.
5. Using lag bolts and washers, lag the ladder to the dock at
each pilot hole location.
NOTE: Softwood docks such as cedar should have holes drilled
through the dock and carriage bolts, washers and locking nuts
used to secure the ladder to the dock.
CAUTION: Failure to follow proper installation
instructions may lead to product failure and personal
injury. Ladder must be mounted flush with the dock
face board. Regularly inspect for wear or damage.
Replace as necessary. (DO NOT EXCEED THE LADDERS'
MAXIMUM CAPACITY OF 665LB. (302KG))
300 New Huntington Rd, Woodbridge, ON, L4H 0R4
LADDER ASSEMBLY INSTRUCTIONS
for Aluminum Fixed Wide Step Ladder
3 STEP
STEPS
3 4 5 7
2 2 2 2
1 0 1 1
0 0 1 2
0 1 0 0
2 2 4 6
2 2 4 6
2 2 4 6
4 STEP
B
A
800-295-3625
5 STEP
D B
C
A
B
E
G
F
C
C
Made and
Printed in Canada
R20382 v1
www.dockedge.com